Analysis snapshotSnapshot decision:REVIEW

LECO Pegasus 4D GC×GC-TOFMS — Auction Analysis

The LECO Pegasus 4D family identity and main chassis are photo-confirmed, but the GC, thermal modulator, secondary oven, vacuum/TOF function, workstation, ChromaTOF environment, and accessory completeness are not established. Thin as-is market evidence and large verification exposure leave a $0 blind hammer ceiling.

Stale-data warning

Analysis snapshot · Open at observation — observed October 1, 2026. This is an immutable observation, not a live feed. The auction is scheduled to close October 7, 2026. Price, status, close time, and terms may have changed. Check the source auction before bidding.

Decision at a glance

RecommendationREVIEW
Maximum hammer bid
$0

The auction bid ceiling supported by this analysis, if one is defensible; see costs below for buyer-premium treatment.

Why this decision

REVIEW: strong family identity does not overcome unresolved configuration, untested analytical function, thin market support, and a negative blind model before acquisition.

What to verify before bidding

  • A visible analyzer chassis does not establish a complete GC×GC-TOFMS workflow.
Review all risks and unknowns

See costs and maximum bid for the displayed assumptions and buyer-premium treatment.

Snapshot auction result
Not captured
Bidders
Not captured
Blind-model resale
$2,500
Snapshot provenance and timing · observed Oct 1, 2026, 6:17 AM UTC · scheduled close October 7, 2026

GSA Auctions sale 3-1-QSC-I-26-593, lot 013 · Denver Federal Center, Colorado 80225
Snapshot observed Oct 1, 2026, 6:17 AM UTC
Scheduled close October 7, 2026
Analysis prepared Oct 1, 2026, 6:17 AM UTC
Published October 1, 2026 · page updated October 1, 2026

Prepared and published by Oleksii Udod for LotCaliper.

These are individually prepared, time-stamped analyses with recorded scheduled closes. Verify the official auction before acting.

Auction snapshot

October 1, 2026 GSA observation; no numeric bid or bidder count was established.

Pegasus 4D branding on an analyzer chassis is not proof of a complete functioning GC×GC-TOFMS workflow.

Review and correction history

Independent review not required. No corrections recorded.

View review and correction details

Independent review not required

No mandatory independent review was required under the current gate. This is not an approval.

How independent review works
How evidence is classified

Seller facts, photo-derived observations, manufacturer context, unknowns, and LotCaliper assumptions remain explicitly separated.

Source Confirmed

Seller-confirmed

  • Seller identity and main chassis branding are established.

Photo Derived

Photo-derived

  • Supplied photographs support bounded physical-presence and exterior observations only; they do not prove seller inclusion or function.

Not Established

Not established

  • GC, modulator, secondary oven, workstation/software, vacuum/TOF function, accessories, and analytical performance.

Lotcaliper Assumption

LotCaliper assumptions

  • $2,500 conservative unverified resale and $0 blind hammer after freight, testing, configuration, uncertainty, selling friction, and required-profit reserves.
Structured photo observations (1)

These are bounded observations from the preserved photographs. They do not establish functional operation or seller inclusion beyond the corresponding source evidence.

Model · Confirmed

LECO and Pegasus 4D branding visible

Photo confidence: High

Equipment identity

Mass Spectrometry · quantity 1

LECO Pegasus 4D GC×GC-TOFMS analytical instrument; exact complete workflow unresolved

Identity confidence: High

Identity evidence
  • Seller identifies LECO Pegasus 4D and supplied photo visibly shows LECO/Pegasus 4D branding.

    GSA Auctions · Image · observed Oct 1, 2026, 6:17 AM UTC

Configuration

Main Pegasus chassis/analyzer assembly

Confirmed · High confidence

Configuration evidence
  • Main chassis/analyzer is visibly present.

    GSA Auctions · Image · observed Oct 1, 2026, 6:17 AM UTC

GC, thermal modulator, secondary oven, autosampler, workstation/ChromaTOF, cables, pumps, gas-path hardware, and accessories

Not established · no source evidence establishes presence or absence

Configuration evidence
  • Supplied photo does not establish complete workflow components.

    GSA Auctions · Image · observed Oct 1, 2026, 6:17 AM UTC

Condition

As-is / repair risk

Seller states used condition, possible missing parts, and possible repairs; no power-on, vacuum, detector, GC, modulation, or analytical test is demonstrated.

Evidence confidence: High

Condition evidence
  • Seller condition statement.

    GSA Auctions · Text · observed Oct 1, 2026, 6:17 AM UTC

Market evidence

Market evidence strength

Medium Low

Public auditability

Full

Evidence recency

Mixed

Exact-family evidence is thin and lacks a qualified exact-model realized working-system sale.

Model matchEvidence typeTreatmentCount
Exact ModelAskingUsed In Valuation1
SourceEvidenceObservedPriceRelevance and treatment
eBay — LECO Pegasus 4D GC×GC TOFMS

Marketplace

Asking

Exact Model

October 1, 2026$3,582

As-is listing; not a demonstrated complete tested workflow.

Used In Valuation

Sensitivity and robustness

Requires Verification

The scenarios show potentially workable economics, but the stated verification gate must be resolved before bidding responsibly.

Analyzer/parts downside

Max hammer
$0
Gross resale model
$1,500

At $1,500 resale the blind ceiling remains $0.

Higher freight or repair reserve

Max hammer
$0
Gross resale model
$2,500

An additional $500 operating reserve leaves the blind ceiling at $0.

Costs and maximum bid

Transaction / operating costAmountBasis
Selling Fees$375LotCaliper assumption: 15% of modeled gross resale.
Shipping$900Buyer-managed packing and inbound-logistics reserve; not a carrier quote.
Testing Repair Reserve$900LotCaliper functional-verification and repair reserve.
Other$400LotCaliper missing-component, configuration, or software reserve.
Risk Buffer$300LotCaliper uncertainty and return-risk reserve.
Buyer premium
Not modeled
Return requirements
$500 minimum profit · 30% minimum ROI
Computed bid constraints

Profit floor: $0

ROI floor: $0

Binding: Profit and ROI floors

Snapshot blind/as-is max hammer
$0
Modeled result at recorded bid
No bid recorded

This is a reseller ceiling, not a prediction of the auction's closing price. Any buyer premium or other unquoted acquisition charge must be deducted before bidding.

Configuration, condition, and conservative bid ceiling

Pegasus 4D branding on an analyzer chassis is not proof of a complete functioning GC×GC-TOFMS workflow.

Verify the actual configuration, functional state, packing/removal cost, and any buyer premium before raising the stated blind hammer ceiling.

  • Do not convert an unknown bid or bidder count to zero.
  • Do not credit unverified components, software, accessories, or function.

Recommendation and rationale

Snapshot decision

REVIEW

REVIEW: strong family identity does not overcome unresolved configuration, untested analytical function, thin market support, and a negative blind model before acquisition.

Confidence

Identity
High
Configuration
Medium Low
Condition
Low
Market Support
Medium Low
Costs
Medium Low
Why these confidence levels were assigned
Identity rationale
Seller and visible chassis branding support family identity.
Material unknowns: Bounded
Configuration rationale
Complete workflow components are unresolved.
Material unknowns: Unbounded
Condition rationale
No operational evidence is retained.
Material unknowns: Unbounded
Market Support rationale
Realized working-system support is thin.
Material unknowns: Unbounded
Costs rationale
Reserves are not quotes.
Material unknowns: Unbounded

Market support assesses how well the available evidence supports the resale assumption. Exact third-party marketplace records may be omitted when source-use rights are unclear. Each dimension uses the published methodology rubric; a confidence label measures the strength and boundedness of its evidence, not the likelihood of a profitable outcome.

Risks and unknowns

High · Configuration Incomplete

A visible analyzer chassis does not establish a complete GC×GC-TOFMS workflow.

GC, modulator, secondary oven, workstation/software, and accessories are unresolved.

Sources

View cited public sources