Analysis snapshotSnapshot decision:REVIEW

Roche LightCycler 480 II /96 — GSA Auction Analysis

The manufacturer plate establishes a Roche LightCycler 480 II /96, serial 26961, but scrap/parts-missing condition, unestablished control software, no demonstrated thermal or optical performance, and removal/decontamination risk leave no positive blind/as-is hammer.

Stale-data warning

Analysis snapshot · Open at observation — observed September 22, 2026. This is an immutable observation, not a live feed. The auction is scheduled to close October 13, 2026. Price, status, close time, and terms may have changed. Check the source auction before bidding.

Decision at a glance

RecommendationREVIEW
Maximum hammer bid
$0

The auction bid ceiling supported by this analysis, if one is defensible; see costs below for buyer-premium treatment.

Why this decision

REVIEW: exact identity and current market demand are useful, but the seller's scrap/parts-missing condition and unbounded configuration/function risks support a $0 blind/as-is ceiling.

What to verify before bidding

  • Unidentified missing parts can remove the block, optics, power, control, or mechanical assemblies that create resale value.
  • No power-on, thermal, optical, or control-software evidence supports a working-system claim.
Review all risks and unknowns

See costs and maximum bid for the displayed assumptions and buyer-premium treatment.

Snapshot auction result
Not captured
Bidders
Not captured
Blind-model resale
$2,500
Snapshot provenance and timing · observed Sep 22, 2026, 6:17 AM UTC · scheduled close October 13, 2026

GSA Auctions sale 4-1-QSC-I-27-005, lot 012 · Los Angeles, California 90049
Snapshot observed Sep 22, 2026, 6:17 AM UTC
Scheduled close October 13, 2026
Analysis prepared Sep 22, 2026, 6:17 AM UTC
Published September 22, 2026 · page updated September 22, 2026

Prepared and published by Oleksii Udod for LotCaliper.

These are individually prepared, time-stamped analyses with recorded scheduled closes. Verify the official auction before acting.

Auction snapshot

This page preserves the September 22, 2026 GSA pre-close observation for item 377708, sale 4-1-QSC-I-27-005, lot 012. No numeric high bid or bidder count was preserved; blank fields are not a $0 result. The scheduled close is recorded as the date-only October 13 marker, not an exact auction clock time.

A plate can correct seller serial and voltage fields without establishing a complete working qPCR system.

Review and correction history

Independent review not required. No corrections recorded.

View review and correction details

Independent review not required

No mandatory independent review was required under the current gate. This is not an approval.

How independent review works
How evidence is classified

Seller facts, photo-derived observations, manufacturer context, unknowns, and LotCaliper assumptions remain explicitly separated.

Source Confirmed

Seller-confirmed

  • The plate establishes LightCycler 480 II /96, serial 26961, and 200–240 Vac, 50/60 Hz, 1500 VA.
  • The seller states scrap condition, missing parts, repairs required, out of use, obsolete, and hazardous material present.

Photo Derived

Photo-derived

  • A rear DataStation/HUB-style interface, a biomedical-engineering PM label, and a biohazard label are visible; none establishes current function or included control hardware.

Not Established

Not established

  • No installed-block condition, control workstation/software, power-on, thermal/optical verification, decontamination evidence, or complete accessory inventory is established.

Manufacturer Context

Independent context

  • Roche documentation identifies the 96-well II family and 200–240 Vac specification; its current support surface does not establish this auction unit's software or functional state.

Lotcaliper Assumption

LotCaliper assumptions

  • $2,500 conservative specialist resale after economical bench verification, not a turnkey qPCR-system appraisal.
  • $0 blind/as-is hammer after selling friction, freight, testing, configuration, repair, and standard-return reserves.
Structured photo observations (1)

These are bounded observations from the preserved photographs. They do not establish functional operation or seller inclusion beyond the corresponding source evidence.

Model · Confirmed

The supplied manufacturer plate directly identifies a Roche LightCycler 480 II /96, serial 26961, with a 200–240 Vac, 50/60 Hz, 1500 VA rating.

Photo confidence: High

Equipment identity

Laboratory · quantity 1

Roche LightCycler 480 II /96 real-time PCR system, serial 26961

Identity confidence: High

Identity evidence
  • The supplied manufacturer plate directly identifies a Roche LightCycler 480 II /96, serial 26961, with a 200–240 Vac, 50/60 Hz, 1500 VA rating.

    GSA Auctions · Image · observed Sep 22, 2026, 6:17 AM UTC

Configuration

Installed /96 block condition, control workstation/software, cables, accessories, and missing-part scope

Not established · no source evidence establishes presence or absence

Configuration evidence
  • No installed-block condition, control workstation/software, power-on, thermal/optical verification, decontamination evidence, or complete accessory inventory is established.

    GSA Auctions · Image · observed Sep 22, 2026, 6:17 AM UTC

Condition

As-is / repair risk

Seller states scrap condition, missing parts, and required repairs; no functional evidence is established.

Evidence confidence: High

Condition evidence
  • Seller-stated scrap, missing-parts, and repair-required condition.

    GSA Auctions · Text · observed Sep 22, 2026, 6:17 AM UTC

Untested

No installed-block condition, control workstation/software, power-on, thermal/optical verification, decontamination evidence, or complete accessory inventory is established.

Evidence confidence: High

Condition evidence
  • No installed-block condition, control workstation/software, power-on, thermal/optical verification, decontamination evidence, or complete accessory inventory is established.

    GSA Auctions · Image · observed Sep 22, 2026, 6:17 AM UTC

Market evidence

Market evidence strength

Medium

Public auditability

Full

Evidence recency

Current

Current exact/near-exact asking evidence spans low-condition as-is inventory through tested, PC/software-equipped and refurbished systems; no qualified recent exact-model realized resale is retained.

Model matchEvidence typeTreatmentCount
Related ModelAskingUsed In Valuation1
Exact ModelAskingUsed In Valuation1
Exact ModelAskingContext Only3
SourceEvidenceObservedPriceRelevance and treatment
DOTmed LightCycler 480 II 5900266

Dealer

Asking

Related Model

September 22, 2026$450

Used-good as-is unserviced/unrefurbished system; /96 suffix not stated.

Used In Valuation

Machinio LightCycler 480 II /96 market

Marketplace

Asking

Exact Model

September 22, 2026$4,000–$9,000

Current exact /96 ordinary-used and tested asking surface with varying configurations.

Used In Valuation

Machinio tested LightCycler /96

Dealer

Asking

Exact Model

September 22, 2026$7,900

Tested /96 with laptop/software and stated 30-day warranty.

Context Only

DOTmed LightCycler /96 3614552

Dealer

Asking

Exact Model

September 22, 2026$20,000

2020 used-good /96 dealer system with prior-service context; high asking ceiling only.

Context Only

DOTmed refurbished LightCycler /96 5104803

Dealer

Asking

Exact Model

September 22, 2026$14,724.10

Refurbished /96 with PC/software; materially stronger than the scrap GSA unit.

Context Only

Sensitivity and robustness

Requires Verification

The scenarios show potentially workable economics, but the stated verification gate must be resolved before bidding responsibly.

Blind/as-is standard profile

Max hammer
$0
Gross resale model
$1,500–$2,500

Both standard return requirements fail at a positive hammer under the approved blind/as-is cost model.

Verified-complete case

Max hammer
$0
Gross resale model
$2,500–$5,000

A positive verified-case ceiling requires a present /96 block, power-on, usable control PC/software, thermal/optical checks, and no major repair.

Costs and maximum bid

Transaction / operating costAmountBasis
Selling Fees$375LotCaliper assumption: 15% of modeled gross resale.
Shipping$600LotCaliper pickup, packing, rigging, and inbound-logistics reserve; not a carrier or GSA quote.
Testing Repair Reserve$400LotCaliper functional-test and diagnostic reserve.
Risk Buffer$500LotCaliper reserve for buyer-managed removal, untested scrap condition, missing parts, configuration recovery, repair, and resale uncertainty.
Other$600LotCaliper missing-component, configuration, or recovery reserve; not a seller or service quote.
Buyer premium
Not modeled
Return requirements
$500 minimum profit · 30% minimum ROI
Computed bid constraints

Profit floor: $0

ROI floor: $0

Binding: Profit and ROI floors

Snapshot blind/as-is max hammer
$0
Modeled result at recorded bid
No bid recorded

This is a reseller ceiling, not a prediction of the auction's closing price. Any buyer premium or other unquoted acquisition charge must be deducted before bidding.

Configuration, functional proof, and blind economics

The lot-specific plate controls over the conflicting seller text: it shows serial 26961 and 200–240 Vac, rather than serial 26891 and 100–240 Vac.

A recent PM sticker and intact exterior do not establish power-on, control-software communication, thermal cycling, fluorescence detection, calibration, or decontamination. Asking prices are not completed sales.

  • Inventory the missing parts and confirm the installed /96 block before assigning working-system value.
  • Verify compatible control PC/software, startup, thermal/optical checks, and decontamination before rebuilding the valuation.

Recommendation and rationale

Snapshot decision

REVIEW

REVIEW: exact identity and current market demand are useful, but the seller's scrap/parts-missing condition and unbounded configuration/function risks support a $0 blind/as-is ceiling.

Confidence

Identity
High
Configuration
Medium Low
Condition
Low
Market Support
Medium
Costs
Low Medium
Why these confidence levels were assigned
Identity rationale
The supplied manufacturer plate directly identifies a Roche LightCycler 480 II /96, serial 26961, with a 200–240 Vac, 50/60 Hz, 1500 VA rating.
Configuration rationale
No installed-block condition, control workstation/software, power-on, thermal/optical verification, decontamination evidence, or complete accessory inventory is established.
Material unknowns: Unbounded
Condition rationale
Seller scrap/repair wording controls; no power-on or functional evidence is supplied.
Material unknowns: Unbounded
Market Support rationale
Current exact/near-exact asking evidence spans low-condition as-is inventory through tested, PC/software-equipped and refurbished systems; no qualified recent exact-model realized resale is retained.
Material unknowns: Bounded
Costs rationale
Buyer-managed removal is established, while actual freight, recovery, and repair costs remain unquoted.
Material unknowns: Unbounded

Market support assesses how well the available evidence supports the resale assumption. Exact third-party marketplace records may be omitted when source-use rights are unclear. Each dimension uses the published methodology rubric; a confidence label measures the strength and boundedness of its evidence, not the likelihood of a profitable outcome.

Risks and unknowns

High · Missing Components

Unidentified missing parts can remove the block, optics, power, control, or mechanical assemblies that create resale value.

The approved snapshot provides no evidence sufficient to remove this resale-critical uncertainty.

High · Functionality Unverified

No power-on, thermal, optical, or control-software evidence supports a working-system claim.

The approved snapshot provides no evidence sufficient to remove this resale-critical uncertainty.

Sources

View cited public sources