Analysis snapshotSnapshot decision:REVIEW

Denton Vacuum DV-502A Thermal Evaporator-Centered Mixed Lab Lot — GSA Auction Analysis

A photo-confirmed Denton Vacuum DV-502A is present in a mixed lot, but vacuum stack, source, gauges, chamber, cooling, function, age, and other equipment identities are unestablished, leaving a $0 blind hammer ceiling.

Stale-data warning

Analysis snapshot · Open at observation — observed October 3, 2026. This is an immutable observation, not a live feed. The auction is scheduled to close October 9, 2026. Price, status, close time, and terms may have changed. Check the source auction before bidding.

Decision at a glance

RecommendationREVIEW
Maximum hammer bid
$0

The auction bid ceiling supported by this analysis, if one is defensible; see costs below for buyer-premium treatment.

Why this decision

REVIEW: The $4,650 blind non-acquisition cost stack exceeds net resale before hammer.

What to verify before bidding

  • Material configuration and functional verification remain unresolved.
Review all risks and unknowns

See costs and maximum bid for the displayed assumptions and buyer-premium treatment.

Snapshot auction result
Not captured
Bidders
Not captured
Blind-model resale
$4,500
Snapshot provenance and timing · observed Oct 3, 2026, 6:17 AM UTC · scheduled close October 9, 2026

GSA Auctions sale 1-1-QSC-I-27-001, lot 014 · Gaithersburg, Maryland 20899
Snapshot observed Oct 3, 2026, 6:17 AM UTC
Scheduled close October 9, 2026
Analysis prepared Oct 3, 2026, 6:17 AM UTC
Published October 3, 2026 · page updated October 3, 2026

Prepared and published by Oleksii Udod for LotCaliper.

These are individually prepared, time-stamped analyses with recorded scheduled closes. Verify the official auction before acting.

Auction snapshot

This page preserves the October 3, 2026 GSA pre-close observation for item 379033, sale 1-1-QSC-I-27-001, lot 014. No numeric current bid or bidder count was established.

A photo-confirmed Denton Vacuum DV-502A is present in a mixed lot, but vacuum stack, source, gauges, chamber, cooling, function, age, and other equipment identities are unestablished, leaving a $0 blind hammer ceiling.

Review and correction history

Independent review not required. No corrections recorded.

View review and correction details

Independent review not required

No mandatory independent review was required under the current gate. This is not an approval.

How independent review works
How evidence is classified

Seller facts, photo-derived observations, manufacturer context, unknowns, and LotCaliper assumptions remain explicitly separated.

Source Confirmed

Seller-confirmed

  • DV-502A cabinet, manual controls, screened chamber/guard assembly, and substantially assembled exterior

Photo Derived

Photo-derived

  • Supplied photos support the stated physical identity/configuration observations only; they do not prove inclusion or function.

Not Established

Not established

  • Roughing/high-vacuum pumps, source hardware, thickness monitor, chamber/seal integrity, gauges, rotation, cooling-water path, age, power-on, vacuum/deposition performance, and other lot equipment identity

Lotcaliper Assumption

LotCaliper assumptions

  • $4500 conservative post-verification resale and $0 blind/as-is hammer before any unknown buyer premium.
Structured photo observations (1)

These are bounded observations from the preserved photographs. They do not establish functional operation or seller inclusion beyond the corresponding source evidence.

Model · Confirmed

DV-502A thermal evaporation system

Photo confidence: High

Equipment identity

Laboratory · quantity 1

Denton Vacuum DV-502A thermal evaporation system

Identity confidence: High

Identity evidence
  • A supplied auction photo directly shows the Denton Vacuum DV-502A front-panel marking.

    GSA Auctions · Image · observed Oct 3, 2026, 6:17 AM UTC

Configuration

DV-502A cabinet, manual controls, screened chamber/guard assembly, and substantially assembled exterior

Confirmed · Medium High confidence

Configuration evidence
  • Supplied photos support the stated physical identity/configuration observations only; they do not prove inclusion or function.

    GSA Auctions · Image · observed Oct 3, 2026, 6:17 AM UTC

Roughing/high-vacuum pumps, source hardware, thickness monitor, chamber/seal integrity, gauges, rotation, cooling-water path, age, power-on, vacuum/deposition performance, and other lot equipment identity

Not established · no source evidence establishes presence or absence

Configuration evidence
  • Roughing/high-vacuum pumps, source hardware, thickness monitor, chamber/seal integrity, gauges, rotation, cooling-water path, age, power-on, vacuum/deposition performance, and other lot equipment identity

    GSA Auctions · Image · observed Oct 3, 2026, 6:17 AM UTC

Condition

Seller Reported Operational

Seller states the mixed-lot items are usable; this is a seller assertion only and does not establish high-vacuum or deposition performance.

Evidence confidence: Low Medium

Condition evidence
  • Seller states the lot items are in usable condition.

    GSA Auctions · Text · observed Oct 3, 2026, 6:17 AM UTC

Untested

No power-on, pump-down, achieved vacuum, deposition, gauge, cooling-water, or leak-test evidence is retained.

Evidence confidence: High

Condition evidence
  • Supplied photos show no powered display, gauge response, active pump state, or application-level test.

    GSA Auctions · Image · observed Oct 3, 2026, 6:17 AM UTC

Market evidence

Market evidence strength

Medium

Public auditability

Full

Evidence recency

Current

Exact-model records are a materially stronger $15,000 dealer ask, a $3,350 high-vacuum-untested marketplace ask, and a sold archive with only a $169.99 last listed price, not a verified transaction amount.

Model matchEvidence typeTreatmentCount
Exact ModelAskingContext Only2
Exact ModelEnded Non RealizedContext Only1
SourceEvidenceObservedPriceRelevance and treatment
Bid Service Denton Vacuum DV-502A

Dealer

Asking

Exact Model

October 3, 2026$15,000

Configured dual-source, monitored, turbo-pump dealer unit.

Context Only

eBay Denton DV502A item 236776599352

Marketplace

Asking

Exact Model

October 3, 2026$3,350

Manual-valve exact model that powers on but lacks high-vacuum testing.

Context Only

HGR Denton DV-502A inventory 0625-053-0137

Dealer

Ended Non Realized

Exact Model

October 3, 2026$169.99

Sold archive; last listed price is not an established transaction amount.

Context Only

Sensitivity and robustness

Requires Verification

The scenarios show potentially workable economics, but the stated verification gate must be resolved before bidding responsibly.

Blind/as-is downside

Max hammer
$0
Gross resale model
$3,500–$4,500

The $4,650 blind non-acquisition cost stack exceeds net resale before hammer.

Vacuum and deposition-critical hardware pass

Max hammer
$700
Gross resale model
$4,500

The approximately $700 ceiling applies only after the stated vacuum, pump, source, gauge, chamber, and cooling verification gate.

Costs and maximum bid

Transaction / operating costAmountBasis
Selling Fees$675LotCaliper reseller-model assumption: 15% of modeled gross resale.
Shipping$1,000Buyer-managed packing, loading, and inbound-logistics reserve; not a quote.
Testing Repair Reserve$2,550Functional-verification and repair reserve; not a service quote.
Other$500Configuration, accessory, or software-recovery reserve; it does not assert a component is missing.
Risk Buffer$600Uncertainty and return-risk reserve; not a quote.
Buyer premium
Not modeled
Return requirements
$500 minimum profit · 30% minimum ROI
Computed bid constraints

Profit floor: $0

ROI floor: $0

Binding: Profit and ROI floors

Snapshot blind/as-is max hammer
$0
Modeled result at recorded bid
No bid recorded

This is a reseller ceiling, not a prediction of the auction's closing price. Any buyer premium or other unquoted acquisition charge must be deducted before bidding.

Configuration, condition, and conservative bid ceiling

A photo-confirmed Denton Vacuum DV-502A is present in a mixed lot, but vacuum stack, source, gauges, chamber, cooling, function, age, and other equipment identities are unestablished, leaving a $0 blind hammer ceiling.

Verify identity, configuration, functional state, packing/removal cost, and any buyer premium before using a positive conditional ceiling.

  • Do not convert unknown bids or bidder counts to zero.
  • Do not credit unverified components, software, accessories, or function.

Recommendation and rationale

Snapshot decision

REVIEW

REVIEW: The $4,650 blind non-acquisition cost stack exceeds net resale before hammer.

Confidence

Identity
High
Configuration
Medium Low
Condition
Low
Market Support
Medium
Costs
Medium Low
Why these confidence levels were assigned
Identity rationale
A supplied auction photo directly shows the Denton Vacuum DV-502A front-panel marking.
Material unknowns: Bounded
Configuration rationale
Roughing/high-vacuum pumps, source hardware, thickness monitor, chamber/seal integrity, gauges, rotation, cooling-water path, age, power-on, vacuum/deposition performance, and other lot equipment identity
Material unknowns: Unbounded
Condition rationale
Seller calls the mixed lot usable, but no power-on, vacuum, deposition, gauge, cooling-water, or leak-test evidence is retained.
Material unknowns: Unbounded
Market Support rationale
Exact-model records are a materially stronger $15,000 dealer ask, a $3,350 high-vacuum-untested marketplace ask, and a sold archive with only a $169.99 last listed price, not a verified transaction amount.
Material unknowns: Bounded
Costs rationale
Reserves are operator allowances, not quotes.
Material unknowns: Unbounded

Market support assesses how well the available evidence supports the resale assumption. Exact third-party marketplace records may be omitted when source-use rights are unclear. Each dimension uses the published methodology rubric; a confidence label measures the strength and boundedness of its evidence, not the likelihood of a profitable outcome.

Risks and unknowns

High · Functionality Unverified

Material configuration and functional verification remain unresolved.

Roughing/high-vacuum pumps, source hardware, thickness monitor, chamber/seal integrity, gauges, rotation, cooling-water path, age, power-on, vacuum/deposition performance, and other lot equipment identity

Sources

View cited public sources