Analysis snapshotSnapshot decision:BUY

2× Pfeiffer Hepta 100-P Dry Vacuum Pumps — Auction Analysis

Two matching Pfeiffer Hepta 100 P dry screw pumps retain motors, substantial controls and purge plumbing, and readable individual plates. Exterior completeness cannot resolve hours, contamination, screw/bearing/seal condition, maintenance, or achieved vacuum, so heavy freight and overhaul risk limit the blind hammer to about $400 despite a $111 observed bid.

Analysis snapshot · Historical — observed August 27, 2026. The scheduled close date of September 2, 2026 has passed. The price, evidence, economics, and recommendation remain exactly as recorded and are not current.

Decision at a glance

RecommendationBUY
Maximum hammer bid
$400

The auction bid ceiling supported by this analysis, if one is defensible; see costs below for buyer-premium treatment.

Why this decision

BUY at the preserved $111 observation, subject to a roughly $400 blind hammer ceiling; the low price does not reduce contamination, overhaul, test-infrastructure, or heavy-logistics risk.

See costs and maximum bid for the displayed assumptions and buyer-premium treatment.

Snapshot observed bid
$111
Bidders
3
Blind-model resale
$7,000
Snapshot provenance and timing · observed August 27, 2026 · scheduled close September 2, 2026

GSA Auctions sale 3-1-QSC-I-26-556, lot 011 · Livingston, Louisiana
Snapshot observed August 27, 2026
Scheduled close September 2, 2026
Analysis prepared August 27, 2026
Published August 27, 2026 · page updated August 27, 2026

Prepared and published by Oleksii Udod for LotCaliper.

Continue after this auction

This auction snapshot is historical. Continue with related research, or review a relevant published analysis whose recorded scheduled close has not passed.

These are individually prepared, time-stamped analyses with recorded scheduled closes. Verify the official auction before acting.

Auction snapshot

At the August 27, 2026 observation, the high bid was $111 with three bidders. The observed bid remains fixed after the scheduled close rather than becoming a live or final-price record.

A visually complete dry screw pump is not a known-good pump: hours, contamination, internal wear, and achieved ultimate pressure matter more than another exterior photo.

Review and correction history

Independent review not recorded for this legacy analysis. No corrections recorded.

View review and correction details

Independent review not recorded

Published before the current independent-review gate; no completed independent review is recorded.

How independent review works
How evidence is classified

Seller facts, photo-derived observations, manufacturer context, unknowns, and LotCaliper assumptions remain explicitly separated.

Source Confirmed

Seller-confirmed

  • Two Pfeiffer Hepta 100 P pumps; seller says usable and no longer in service.
  • Both plates state P/N PU V12 422 A; serials 50071078 and 50071063.

Photo Derived

Photo-derived

  • Each plate states 130.0 m³/h, 3,600 rpm, 264.0 kg; one establishes D1 oil 1.6 L.
  • Motors, frames, plumbing, purge lines, valves, gauges, and control components are substantially present.

Not Established

Not established

  • Operating hours, process contamination, maintenance/overhaul history, internal screw/bearing/seal condition, purge/cooling function, or ultimate pressure.
  • Current function of either pump or attached controls.

Manufacturer Context

Independent context

  • Hepta 100 P is dry in the process-gas compression path, while the gearbox/bearing system still uses lubricant; the whole machine should not be described ambiguously as oil-free.

Lotcaliper Assumption

LotCaliper assumptions

  • $7,000 conservative gross resale for the pair.
  • $4,175 non-acquisition burden excluding selling fees and hammer; ~$400 maximum hammer.

Equipment identity

Laboratory · quantity 1

Pfeiffer Vacuum Hepta 100 P, P/N PU V12 422 A, S/N 50071078

Identity confidence: High

Identity evidence
  • Readable plate establishes P/N PU V12 422 A, S/N 50071078, 130.0 m³/h, 3,600 rpm, 264.0 kg, and D1 oil 1.6 L.

    GSA Auctions · Image · observed August 27, 2026

Laboratory · quantity 1

Pfeiffer Vacuum Hepta 100 P, P/N PU V12 422 A, S/N 50071063

Identity confidence: High

Identity evidence
  • Readable plate establishes P/N PU V12 422 A, S/N 50071063 and the matching 130.0 m³/h, 3,600 rpm, 264.0 kg specification.

    GSA Auctions · Image · observed August 27, 2026

Configuration

Drive motor, chassis, process plumbing, purge lines, valves, gauges, and controls

Confirmed · High confidence

Configuration evidence
  • Pump A retains substantial attached hardware and does not appear stripped; function is not established.

    GSA Auctions · Image · observed August 27, 2026

Drive motor, chassis, process plumbing, purge lines, valves, gauges, and controls

Confirmed · High confidence

Configuration evidence
  • Pump B retains substantial attached hardware and does not appear stripped; function is not established.

    GSA Auctions · Image · observed August 27, 2026

Pair bare-pump mass: at least 528 kg / approximately 1,164 lb

Confirmed · High confidence

Configuration evidence
  • Each readable plate states 264.0 kg; packaging and attachments add further logistics burden.

    GSA Auctions · Image · observed August 27, 2026

Condition

Untested

Exterior appears intact, but operating hours, contamination, internal wear, purge/cooling condition, and achieved ultimate pressure are unverified.

Evidence confidence: High

Condition evidence
  • Photo review and absent vacuum-performance test.

    GSA Auctions · Image · observed August 27, 2026

Untested

Seller's usable classification is not a verified start, pump-down, current, vibration, leak, or blank-off test.

Evidence confidence: High

Condition evidence
  • Seller condition statement and absent operating evidence.

    GSA Auctions · Text · observed August 27, 2026

Market evidence

Market evidence strength

Medium Low

Public auditability

Limited Legacy

Evidence recency

Not Recorded

No structured comparable-evidence metadata was preserved for this dated snapshot. Public auditability is limited; the numeric resale snapshot cannot be independently audited from comparable records on this page.

Legacy evidence counts were not preserved. Unknown is not reported as zero.

Sensitivity and robustness

Survives

The published decision survives the selected downside check under the stated bounded assumptions.

Blind/as-is pair model

Max hammer
$400
Gross resale model
$7,000

At the preserved $111 observation, modeled profit is about $1,664 and ROI about 38.8%. The observation remains immutable after close.

Costs and maximum bid

Transaction / operating costAmountBasis
Selling Fees$1,050LotCaliper assumption: 15% of modeled gross resale.
Shipping$1,500LotCaliper pickup, packing, rigging, and inbound-logistics reserve; not a carrier or GSA quote.
Testing Repair Reserve$500LotCaliper functional-test and diagnostic reserve.
Risk Buffer$2,175Unknown hours, process contamination, screw/bearing/seal condition, maintenance history, overhaul exposure, and specialist liquidity.
Buyer premium
Not modeled
Return requirements
$500 minimum profit · 30% minimum ROI
Computed bid constraints

Profit floor: $1,275

ROI floor: $402

Binding: ROI floor

Snapshot blind/as-is max hammer
$400
Modeled result at recorded bid
$1,664 profit · 38.80% modeled ROI

This is a reseller ceiling, not a prediction of the auction's closing price. Any buyer premium or other unquoted acquisition charge must be deducted before bidding.

Pair identity, dry-pump terminology, and economics

The two bare pumps total at least 528 kg / approximately 1,164 lb before pallets, hoses, or packaging. A meaningful test requires correct electrical rotation, cooling and purge, start/current/noise/vibration checks, leak review, pump-down observation, warm ultimate-pressure measurement, and contamination inspection.

  • Substantial attached controls and plumbing are positive completeness evidence, not proof of function.
  • Dry process-gas compression does not mean the entire machine contains no lubricant.
  • Do not extrapolate single-unit value without accounting for pair logistics and potentially duplicated overhaul risk.

Recommendation and rationale

Snapshot decision

BUY

BUY at the preserved $111 observation, subject to a roughly $400 blind hammer ceiling; the low price does not reduce contamination, overhaul, test-infrastructure, or heavy-logistics risk.

Confidence

Identity
High
Configuration
High
Condition
Low
Market Support
Medium Low
Costs
Medium Low

Market support assesses how well the available evidence supports the resale assumption. Exact third-party marketplace records may be omitted when source-use rights are unclear. Each dimension uses the published methodology rubric; a confidence label measures the strength and boundedness of its evidence, not the likelihood of a profitable outcome.

Risks and unknowns

High · Vacuum Performance Unverified

No pump-down or ultimate-pressure performance is established.

No powered vacuum test.

High · Process Contamination Unknown

Process history and internal contamination are unknown.

No process or inspection record.

High · Operating Hours Unknown

Operating hours are unknown.

No hour or service record.

High · Maintenance History Unknown

Oil-change and maintenance history are unknown.

No maintenance record.

High · Overhaul Risk

Internal screw, bearing, seal, and timing-gear condition may create major overhaul exposure.

Exterior completeness cannot establish internal condition.

High · Heavy Logistics

The bare pumps total at least 528 kg before pallets and packaging.

Two readable 264 kg plates.

High · Three Phase And Cooling Test Requirements

Meaningful testing requires appropriate electrical, cooling, purge, and vacuum infrastructure.

Dry screw pump operating requirements.

Sources

View cited public sources