Analysis snapshotSnapshot decision:REVIEW

ZEISS Humphrey Field Analyzer 3 (HFA3) 860 — GSA Auction Analysis

A 2021 photo-confirmed ZEISS HFA3 860 has a known projector fault and a real exact-model market, but its projector-service scope is unbounded, so the actionable blind/as-is hammer ceiling is $0.

Stale-data warning

Analysis snapshot · Open at observation — observed October 2, 2026. This is an immutable observation, not a live feed. The auction is scheduled to close October 8, 2026. Price, status, close time, and terms may have changed. Check the source auction before bidding.

Decision at a glance

RecommendationREVIEW
Maximum hammer bid
$0

The auction bid ceiling supported by this analysis, if one is defensible; see costs below for buyer-premium treatment.

Why this decision

REVIEW: Without a unit-specific diagnosis or repair cap, no positive blind hammer is supportable; a $2,000 conditional ceiling requires bounded projector repair and no additional material faults.

What to verify before bidding

  • Material configuration and functional verification remain unresolved.
Review all risks and unknowns

See costs and maximum bid for the displayed assumptions and buyer-premium treatment.

Snapshot observed bid
$500
Bidders
Not captured
Blind-model resale
$9,000
Snapshot provenance and timing · observed Oct 2, 2026, 6:17 AM UTC · scheduled close October 8, 2026

GSA Auctions sale 1-1-QSC-I-27-012, lot 039 · Columbus, Ohio 43219
Snapshot observed Oct 2, 2026, 6:17 AM UTC
Scheduled close October 8, 2026
Analysis prepared Oct 2, 2026, 6:17 AM UTC
Published October 2, 2026 · page updated October 2, 2026

Prepared and published by Oleksii Udod for LotCaliper.

These are individually prepared, time-stamped analyses with recorded scheduled closes. Verify the official auction before acting.

Auction snapshot

This page preserves the October 2, 2026 GSA pre-close observation for item 378826, sale 1-1-QSC-I-27-012, lot 039. The immutable observed bid was $500; bidder count was not established.

A 2021 photo-confirmed ZEISS HFA3 860 has a known projector fault and a real exact-model market, but its projector-service scope is unbounded, so the actionable blind/as-is hammer ceiling is $0.

Review and correction history

Independent review completed. No corrections recorded.

View review and correction details

Independent review completed

Status: Approved · Reviewed October 2, 2026

Mandatory adversarial review reduced resale to $9,000, changed BUY to REVIEW, and retained only a $2,000 conditional ceiling after service scope is bounded.

How independent review works
How evidence is classified

Seller facts, photo-derived observations, manufacturer context, unknowns, and LotCaliper assumptions remain explicitly separated.

Source Confirmed

Seller-confirmed

  • HFA3 860 instrument, table/cart, printer, dust cover, cabling, and boxed Liquid Trial Lens assembly

Photo Derived

Photo-derived

  • Supplied photos support the stated physical identity/configuration observations only; they do not prove inclusion or function.

Not Established

Not established

  • Projector repair scope, calibration, self-test, field-test accuracy, Liquid Trial Lens function, software, printer, and table operation

Lotcaliper Assumption

LotCaliper assumptions

  • $9000 conservative post-verification resale and $0 blind/as-is hammer before any unknown buyer premium.
Structured photo observations (1)

These are bounded observations from the preserved photographs. They do not establish functional operation or seller inclusion beyond the corresponding source evidence.

Model · Confirmed

Humphrey Field Analyzer 3 Model 860, S/N 860-20228

Photo confidence: High

Equipment identity

Laboratory · quantity 1

ZEISS Humphrey Field Analyzer 3 Model 860, S/N 860-20228

Identity confidence: High

Identity evidence
  • Manufacturer plate directly shows HFA3 Model 860, S/N 860-20228, manufactured 2021-07-20.

    GSA Auctions · Image · observed Oct 2, 2026, 6:17 AM UTC

Configuration

HFA3 860 instrument, table/cart, printer, dust cover, cabling, and boxed Liquid Trial Lens assembly

Confirmed · Medium High confidence

Configuration evidence
  • Supplied photos support the stated physical identity/configuration observations only; they do not prove inclusion or function.

    GSA Auctions · Image · observed Oct 2, 2026, 6:17 AM UTC

Projector repair scope, calibration, self-test, field-test accuracy, Liquid Trial Lens function, software, printer, and table operation

Not established · no source evidence establishes presence or absence

Configuration evidence
  • Projector repair scope, calibration, self-test, field-test accuracy, Liquid Trial Lens function, software, printer, and table operation

    GSA Auctions · Image · observed Oct 2, 2026, 6:17 AM UTC

Condition

Confirmed repair required

Seller reports both a projection-lamp replacement message and failure to attain required projector intensity; this is not reduced to a lamp-only repair.

Evidence confidence: Low

Condition evidence
  • Seller reports both a projection-lamp replacement message and failure to attain required projector intensity; this is not reduced to a lamp-only repair.

    GSA Auctions · Text · observed Oct 2, 2026, 6:17 AM UTC

Market evidence

Market evidence strength

Medium

Public auditability

Full

Evidence recency

Current

Current exact-model dealer asks are asking prices, while the $6,555 GSA high bid is acquisition evidence; the $10,999 refurbished dealer offer limits a conservative no-warranty resale to $9,000.

Model matchEvidence typeTreatmentCount
Exact ModelAskingContext Only1
Exact ModelRealized Auction AcquisitionContext Only1
SourceEvidenceObservedPriceRelevance and treatment
Saturn Optical HFA3 860

Dealer

Asking

Exact Model

October 2, 2026$10,999

Fully refurbished exact-model system with table/peripherals and warranty.

Context Only

GovRadar GSA item 376795

Auction

Realized Auction Acquisition

Exact Model

October 2, 2026$6,555

Recent HFA3 860 auction high bid; not downstream reseller resale.

Context Only

Sensitivity and robustness

Requires Verification

The scenarios show potentially workable economics, but the stated verification gate must be resolved before bidding responsibly.

Blind/as-is downside

Max hammer
$0
Gross resale model
$8,000–$9,000

Without a unit-specific diagnosis or repair cap, no positive blind hammer is supportable; a $2,000 conditional ceiling requires bounded projector repair and no additional material faults.

Costs and maximum bid

Transaction / operating costAmountBasis
Selling Fees$1,350LotCaliper reseller-model assumption: 15% of modeled gross resale.
Shipping$600Buyer-managed packing, loading, and inbound-logistics reserve; not a quote.
Testing Repair Reserve$2,800Functional-verification and repair reserve; not a service quote.
Other$300Configuration, accessory, or software-recovery reserve; it does not assert a component is missing.
Risk Buffer$400Uncertainty and return-risk reserve; not a quote.
Buyer premium
Not modeled
Return requirements
$500 minimum profit · 30% minimum ROI
Computed bid constraints

Profit floor: $3,050

ROI floor: $1,785

Binding: ROI floor

Snapshot blind/as-is max hammer
$0
Modeled result at recorded bid
No bid recorded

This is a reseller ceiling, not a prediction of the auction's closing price. Any buyer premium or other unquoted acquisition charge must be deducted before bidding.

Configuration, condition, and conservative bid ceiling

A 2021 photo-confirmed ZEISS HFA3 860 has a known projector fault and a real exact-model market, but its projector-service scope is unbounded, so the actionable blind/as-is hammer ceiling is $0.

Verify identity, configuration, functional state, packing/removal cost, and any buyer premium before using a positive conditional ceiling.

  • Do not convert unknown bids or bidder counts to zero.
  • Do not credit unverified components, software, accessories, or function.

Recommendation and rationale

Snapshot decision

REVIEW

REVIEW: Without a unit-specific diagnosis or repair cap, no positive blind hammer is supportable; a $2,000 conditional ceiling requires bounded projector repair and no additional material faults.

Confidence

Identity
High
Configuration
Medium Low
Condition
Low
Market Support
Medium
Costs
Medium Low
Why these confidence levels were assigned
Identity rationale
Manufacturer plate directly shows HFA3 Model 860, S/N 860-20228, manufactured 2021-07-20.
Material unknowns: Bounded
Configuration rationale
Projector repair scope, calibration, self-test, field-test accuracy, Liquid Trial Lens function, software, printer, and table operation
Material unknowns: Unbounded
Condition rationale
Seller reports both a projection-lamp replacement message and failure to attain required projector intensity; this is not reduced to a lamp-only repair.
Material unknowns: Unbounded
Market Support rationale
Current exact-model dealer asks are asking prices, while the $6,555 GSA high bid is acquisition evidence; the $10,999 refurbished dealer offer limits a conservative no-warranty resale to $9,000.
Material unknowns: Bounded
Costs rationale
Reserves are operator allowances, not quotes.
Material unknowns: Unbounded

Market support assesses how well the available evidence supports the resale assumption. Exact third-party marketplace records may be omitted when source-use rights are unclear. Each dimension uses the published methodology rubric; a confidence label measures the strength and boundedness of its evidence, not the likelihood of a profitable outcome.

Risks and unknowns

High · Functionality Unverified

Material configuration and functional verification remain unresolved.

Projector repair scope, calibration, self-test, field-test accuracy, Liquid Trial Lens function, software, printer, and table operation

Sources

View cited public sources