Analysis snapshotSnapshot decision:REVIEW

Perimed PeriFlux 6000 4-Channel TcpO₂ System — Auction Analysis

Four photo-confirmed PF 6040 TcpO₂/pCO₂ modules make this a valuable PeriFlux 6000 configuration, but only two electrode assemblies are visibly established and no function, recognition, calibration, or measurement evidence supports more than a ~$700 blind ceiling.

Analysis snapshot · Historical — observed September 2, 2026. The scheduled close date of September 8, 2026 has passed. The price, evidence, economics, and recommendation remain exactly as recorded and are not current.

Decision at a glance

RecommendationREVIEW
Maximum hammer bid
$700

The auction bid ceiling supported by this analysis, if one is defensible; see costs below for buyer-premium treatment.

Why this decision

REVIEW: the ~$700 blind ceiling uses a $4,000 post-verification resale model, while observed auction price, module recognition, electrode health, and measurement performance remain unresolved.

What to verify before bidding

  • Four modules do not establish four included, healthy electrodes.
  • The lot is not a photo-confirmed PeriFlux 6000 Combined system.
Review all risks and unknowns

See costs and maximum bid for the displayed assumptions and buyer-premium treatment.

Snapshot auction result
Not captured
Bidders
Not captured
Blind-model resale
$4,000
Snapshot provenance and timing · observed September 2, 2026 · scheduled close September 8, 2026

GSA Auctions sale 1-1-QSC-I-26-310, lot 003 · Augusta, Maine 04330
Snapshot observed September 2, 2026
Scheduled close September 8, 2026
Analysis prepared September 2, 2026
Published September 2, 2026 · page updated September 2, 2026

Prepared and published by Oleksii Udod for LotCaliper.

View official GSA lot

Continue after this auction

This auction snapshot is historical. Continue with related research, or review a relevant published analysis whose recorded scheduled close has not passed.

These are individually prepared, time-stamped analyses with recorded scheduled closes. Verify the official auction before acting.

Auction snapshot

This page preserves the September 2, 2026 GSA preview observation for sale 1-1-QSC-I-26-310, lot 003. No high bid or bidder count was displayed.

Four installed measurement modules do not create a complete four-channel clinical system without healthy, recognized electrodes and demonstrated measurements.

Review and correction history

Independent review not recorded for this legacy analysis. No corrections recorded.

View review and correction details

Independent review not recorded

Published before the current independent-review gate; no completed independent review is recorded.

How independent review works
How evidence is classified

Seller facts, photo-derived observations, manufacturer context, unknowns, and LotCaliper assumptions remain explicitly separated.

Source Confirmed

Seller-confirmed

  • Four PF 6040 TcpO₂/pCO₂ modules are photo-confirmed; two connected electrode assemblies are visible.

Photo Derived

Photo-derived

  • The cart, touchscreen, printer, cabling, and accessory basket are visible; the screen is dark.

Not Established

Not established

  • Total electrode count, electrode health, module recognition, software, calibration, stable measurement, and accessory-basket identity.

Manufacturer Context

Independent context

  • Perimed continues to support the PeriFlux 6000 family and PF 6040-related workflow context.

Lotcaliper Assumption

LotCaliper assumptions

  • $4,000 conservative resale after credible four-module and electrode verification.
  • ~$700 blind maximum hammer after logistics, testing, electrode, selling, profit, and uncertainty reserves.

Equipment identity

Analyzer · quantity 1

Perimed PeriFlux 6000 TcpO₂/pCO₂ cart system with 4 PF 6040 modules

Identity confidence: High

Identity evidence
  • Four installed PF 6040 tcpO₂/pCO₂ modules are visible in the supplied rear-module photograph.

    GSA Auctions · Image · observed September 2, 2026

Configuration

Complete electrode set and electrode health

Not established · no source evidence establishes presence or absence

Configuration evidence
  • Only two connected electrode assemblies are visibly established; empty blue and purple module connectors do not prove four usable electrodes.

    GSA Auctions · Image · observed September 2, 2026

PF 6050 pressure module / Combined-system configuration

Not established · no source evidence establishes presence or absence

Configuration evidence
  • No PF 6050 pressure module is visible.

    GSA Auctions · Image · observed September 2, 2026

Condition

Untested

No power-on, module recognition, electrode calibration, stable TcpO₂ measurement, or clinical workflow evidence is supplied.

Evidence confidence: High

Condition evidence
  • The touchscreen is dark and the supplied photographs are not functional evidence.

    GSA Auctions · Image · observed September 2, 2026

Market evidence

Market evidence strength

Medium

Public auditability

Limited Legacy

Evidence recency

Not Recorded

No structured comparable-evidence metadata was preserved for this dated snapshot. Public auditability is limited; the numeric resale snapshot cannot be independently audited from comparable records on this page.

Legacy evidence counts were not preserved. Unknown is not reported as zero.

Sensitivity and robustness

Requires Verification

The scenarios show potentially workable economics, but the stated verification gate must be resolved before bidding responsibly.

Four-module post-verification model

Max hammer
$700
Gross resale model
$3,000–$5,000

The ceiling reserves for logistics, functional/calibration work, aged or missing electrodes, selling friction, and uncertainty.

Costs and maximum bid

Transaction / operating costAmountBasis
Selling Fees$600LotCaliper assumption: 15% of modeled gross resale.
Shipping$300LotCaliper pickup, packing, rigging, and inbound-logistics reserve; not a carrier or GSA quote.
Testing Repair Reserve$400LotCaliper functional-test and diagnostic reserve.
Risk Buffer$500Module, touchscreen/software, electrode, and hidden-condition risk reserve.
Other$700LotCaliper missing-component, configuration, or recovery reserve; not a seller or service quote.
Buyer premium
Not modeled
Return requirements
$500 minimum profit · 30% minimum ROI
Computed bid constraints

Profit floor: $1,000

ROI floor: $715

Binding: ROI floor

Snapshot blind/as-is max hammer
$700
Modeled result at recorded bid
No bid recorded

This is a reseller ceiling, not a prediction of the auction's closing price. Any buyer premium or other unquoted acquisition charge must be deducted before bidding.

Module count, electrode evidence, and measurement risk

The four PF 6040 modules are positive configuration evidence, but only two electrode assemblies are established. The analysis does not call this a Combined pressure/TcpO₂ system because no PF 6050 pressure module is visible.

A stronger value requires booting, recognition of all modules, qualifying sufficient electrodes, and demonstrating stable measurement and reporting workflow.

  • Inventory every included electrode by model and condition.
  • Verify module enumeration, electrode calibration, stable readings, software version, and freight before paying a tested-system premium.

Recommendation and rationale

Snapshot decision

REVIEW

REVIEW: the ~$700 blind ceiling uses a $4,000 post-verification resale model, while observed auction price, module recognition, electrode health, and measurement performance remain unresolved.

Confidence

Identity
High
Configuration
Medium
Condition
Low
Market Support
Medium
Costs
Medium

Market support assesses how well the available evidence supports the resale assumption. Exact third-party marketplace records may be omitted when source-use rights are unclear. Each dimension uses the published methodology rubric; a confidence label measures the strength and boundedness of its evidence, not the likelihood of a profitable outcome.

Risks and unknowns

High · Electrode Count Unresolved

Four modules do not establish four included, healthy electrodes.

Only two electrode assemblies are photo-confirmed.

High · Pressure Module Not Evidenced

The lot is not a photo-confirmed PeriFlux 6000 Combined system.

No PF 6050 pressure module is visible.

Sources

View cited public sources