Analysis snapshotSnapshot decision:REVIEW

Fluke DSP-4100 CableAnalyzer + DSP-4100SR — GSA Auction Analysis

The photo-confirmed DSP-4100/DSP-4100SR pair includes two DSP-LIA012 channel adapters, but dead batteries, absent calibration, unresolved kit completeness, pickup-only removal, and unverified function leave a $0 blind hammer ceiling.

Stale-data warning

Analysis snapshot · Open at observation — observed October 2, 2026. This is an immutable observation, not a live feed. The auction is scheduled to close October 13, 2026. Price, status, close time, and terms may have changed. Check the source auction before bidding.

Decision at a glance

RecommendationREVIEW
Maximum hammer bid
$0

The auction bid ceiling supported by this analysis, if one is defensible; see costs below for buyer-premium treatment.

Why this decision

REVIEW: Battery, calibration, accessory, and pickup/repair exposure make expected blind economics negative before hammer.

What to verify before bidding

  • Material configuration and functional verification remain unresolved.
Review all risks and unknowns

See costs and maximum bid for the displayed assumptions and buyer-premium treatment.

Snapshot auction result
Not captured
Bidders
Not captured
Blind-model resale
$700
Snapshot provenance and timing · observed Oct 2, 2026, 6:17 AM UTC · scheduled close October 13, 2026

GSA Auctions sale 4-1-QSC-I-27-009, lot 014 · Byron, California 94514
Snapshot observed Oct 2, 2026, 6:17 AM UTC
Scheduled close October 13, 2026
Analysis prepared Oct 2, 2026, 6:17 AM UTC
Published October 2, 2026 · page updated October 2, 2026

Prepared and published by Oleksii Udod for LotCaliper.

These are individually prepared, time-stamped analyses with recorded scheduled closes. Verify the official auction before acting.

Auction snapshot

This page preserves the October 2, 2026 GSA pre-close observation for item 378841, sale 4-1-QSC-I-27-009, lot 014. No numeric current bid or bidder count was established.

The photo-confirmed DSP-4100/DSP-4100SR pair includes two DSP-LIA012 channel adapters, but dead batteries, absent calibration, unresolved kit completeness, pickup-only removal, and unverified function leave a $0 blind hammer ceiling.

Review and correction history

Independent review not required. No corrections recorded.

View review and correction details

Independent review not required

No mandatory independent review was required under the current gate. This is not an approval.

How independent review works
How evidence is classified

Seller facts, photo-derived observations, manufacturer context, unknowns, and LotCaliper assumptions remain explicitly separated.

Source Confirmed

Seller-confirmed

  • Paired main/remote, two DSP-LIA012 channel adapters, carrying case, and loose cabling

Photo Derived

Photo-derived

  • Supplied photos support the stated physical identity/configuration observations only; they do not prove inclusion or function.

Not Established

Not established

  • Power-on, main/remote communication, cable-test function, chargers, DSP-LIA011 adapters, calibration module, memory hardware, and other standard-kit items

Lotcaliper Assumption

LotCaliper assumptions

  • $700 conservative post-verification resale and $0 blind/as-is hammer before any unknown buyer premium.
Structured photo observations (1)

These are bounded observations from the preserved photographs. They do not establish functional operation or seller inclusion beyond the corresponding source evidence.

Model · Confirmed

DSP-4100 CableAnalyzer with DSP-4100SR Smart Remote, S/N 7950045

Photo confidence: High

Equipment identity

Rf Telecom · quantity 1

Fluke DSP-4100 CableAnalyzer with DSP-4100SR Smart Remote, S/N 7950045

Identity confidence: High

Identity evidence
  • Photos directly show the DSP-4100 main unit, DSP-4100SR Smart Remote, and main-unit S/N 7950045.

    GSA Auctions · Image · observed Oct 2, 2026, 6:17 AM UTC

Configuration

Paired main/remote, two DSP-LIA012 channel adapters, carrying case, and loose cabling

Confirmed · Medium High confidence

Configuration evidence
  • Supplied photos support the stated physical identity/configuration observations only; they do not prove inclusion or function.

    GSA Auctions · Image · observed Oct 2, 2026, 6:17 AM UTC

Power-on, main/remote communication, cable-test function, chargers, DSP-LIA011 adapters, calibration module, memory hardware, and other standard-kit items

Not established · no source evidence establishes presence or absence

Configuration evidence
  • Power-on, main/remote communication, cable-test function, chargers, DSP-LIA011 adapters, calibration module, memory hardware, and other standard-kit items

    GSA Auctions · Image · observed Oct 2, 2026, 6:17 AM UTC

Condition

As-is / repair risk

Seller states both batteries will not hold a charge and the unit is not calibrated; no successful power-on or cable measurement is established.

Evidence confidence: Low

Condition evidence
  • Seller states both batteries will not hold a charge and the unit is not calibrated; no successful power-on or cable measurement is established.

    GSA Auctions · Text · observed Oct 2, 2026, 6:17 AM UTC

Market evidence

Market evidence strength

Medium

Public auditability

Full

Evidence recency

Current

One AU$850 exact-family realized kit sale and current exact-family asks support a real low-dollar market, but stronger complete/refurbished kits are not direct equivalents.

Model matchEvidence typeTreatmentCount
Exact ModelRealizedUsed In Valuation1
Exact ModelAskingContext Only1
SourceEvidenceObservedPriceRelevance and treatment
eBay Australia item 224528834582

Marketplace

Realized

Exact Model

October 2, 2026A$850

Used DSP-4100/Smart Remote kit; different geography and accessory state.

Used In Valuation

eBay item 256116182390

Marketplace

Asking

Exact Model

October 2, 2026$1,000

Seller-refurbished kit with stronger accessory configuration.

Context Only

Sensitivity and robustness

Requires Verification

The scenarios show potentially workable economics, but the stated verification gate must be resolved before bidding responsibly.

Blind/as-is downside

Max hammer
$0
Gross resale model
$0–$700

Battery, calibration, accessory, and pickup/repair exposure make expected blind economics negative before hammer.

Costs and maximum bid

Transaction / operating costAmountBasis
Selling Fees$105LotCaliper reseller-model assumption: 15% of modeled gross resale.
Shipping$250Buyer-managed packing, loading, and inbound-logistics reserve; not a quote.
Testing Repair Reserve$535Functional-verification and repair reserve; not a service quote.
Other$100Configuration, accessory, or software-recovery reserve; it does not assert a component is missing.
Risk Buffer$100Uncertainty and return-risk reserve; not a quote.
Buyer premium
Not modeled
Return requirements
$500 minimum profit · 30% minimum ROI
Computed bid constraints

Profit floor: $0

ROI floor: $0

Binding: Profit and ROI floors

Snapshot blind/as-is max hammer
$0
Modeled result at recorded bid
No bid recorded

This is a reseller ceiling, not a prediction of the auction's closing price. Any buyer premium or other unquoted acquisition charge must be deducted before bidding.

Configuration, condition, and conservative bid ceiling

The photo-confirmed DSP-4100/DSP-4100SR pair includes two DSP-LIA012 channel adapters, but dead batteries, absent calibration, unresolved kit completeness, pickup-only removal, and unverified function leave a $0 blind hammer ceiling.

Verify identity, configuration, functional state, packing/removal cost, and any buyer premium before using a positive conditional ceiling.

  • Do not convert unknown bids or bidder counts to zero.
  • Do not credit unverified components, software, accessories, or function.

Recommendation and rationale

Snapshot decision

REVIEW

REVIEW: Battery, calibration, accessory, and pickup/repair exposure make expected blind economics negative before hammer.

Confidence

Identity
High
Configuration
Medium Low
Condition
Low
Market Support
Medium
Costs
Medium Low
Why these confidence levels were assigned
Identity rationale
Photos directly show the DSP-4100 main unit, DSP-4100SR Smart Remote, and main-unit S/N 7950045.
Material unknowns: Bounded
Configuration rationale
Power-on, main/remote communication, cable-test function, chargers, DSP-LIA011 adapters, calibration module, memory hardware, and other standard-kit items
Material unknowns: Unbounded
Condition rationale
Seller states both batteries will not hold a charge and the unit is not calibrated; no successful power-on or cable measurement is established.
Material unknowns: Unbounded
Market Support rationale
One AU$850 exact-family realized kit sale and current exact-family asks support a real low-dollar market, but stronger complete/refurbished kits are not direct equivalents.
Material unknowns: Bounded
Costs rationale
Reserves are operator allowances, not quotes.
Material unknowns: Unbounded

Market support assesses how well the available evidence supports the resale assumption. Exact third-party marketplace records may be omitted when source-use rights are unclear. Each dimension uses the published methodology rubric; a confidence label measures the strength and boundedness of its evidence, not the likelihood of a profitable outcome.

Risks and unknowns

High · Functionality Unverified

Material configuration and functional verification remain unresolved.

Power-on, main/remote communication, cable-test function, chargers, DSP-LIA011 adapters, calibration module, memory hardware, and other standard-kit items

Sources

View cited public sources