Value-bearing instruments verify
$700
The ROI ceiling is about $711.54 before rounding.
Analysis snapshotSnapshot decision:REVIEW
Biomedical Test Equipment Lot — SimCube SC-4, 9600 Plus, LKG 601 & medTester 5000 — GSA Auction Analysis
A mixed repairable biomedical-test lot contains photo-confirmed medTester 5000, Netech LKG 601, PronK SimCube SC-4, and UPM-DT-10, plus two seller-identified Welch Allyn 9600 Plus units. The open observation has no established bid or bidder count; no blind positive hammer is supported, while about $700 is conditional on representative verification.
Stale-data warning
Analysis snapshot · Open at observation — observed October 8, 2026. This is an immutable observation, not a live feed. The auction is scheduled to close October 13, 2026. Price, status, close time, and terms may have changed. Check the source auction before bidding.
Decision at a glance
RecommendationREVIEW
Verification required before bidding
REVIEW retains a decision-material input that must be resolved before treating any bid as responsible.
- Blind/as-is model ceiling
- $0
REVIEW means material verification is still required before bidding responsibly. This is the current snapshot blind/as-is model ceiling, not a verification-dependent scenario ceiling.
Why this decision
REVIEW: bid and bidder count were not established, so no observed-bid comparison is valid. The $0 blind ceiling rises to about $700 only after value-bearing instruments pass representative verification.
What to verify before bidding
- No principal instrument has demonstrated function or current calibration.
Conditional scenario ceiling
These are verification-dependent scenarios, not current bid limits.
Not a current bid limit. Use only if the stated scenario conditions are satisfied.
Review full sensitivity scenariosSee costs and maximum bid for the displayed assumptions and buyer-premium treatment.
- Snapshot auction result
- Not captured
- Bidders
- Not captured
- Resale model
- $1,800–$3,000
Modeled resale range · conservative max-bid input $1,800
Snapshot provenance and timing · observed Oct 8, 2026, 6:17 AM UTC · scheduled close October 13, 2026
GSA Auctions sale 1-1-QSC-I-27-020, lot 018 · Lake City, Florida 32025
Snapshot observed Oct 8, 2026, 6:17 AM UTC
Scheduled close October 13, 2026
Analysis prepared Oct 8, 2026, 6:17 AM UTC
Published October 8, 2026 · page updated October 8, 2026
Prepared and published by Oleksii Udod for LotCaliper.
Currently open related analyses
Cannon L-63 + Power House Load BanksScheduled close October 9, 2026 · Same equipment familyAudioscan Verifit2 VF-2Scheduled close October 13, 2026 · Same equipment family2× MADSEN Astera² + GSI 61Scheduled close October 13, 2026 · Same equipment family
These are individually prepared, time-stamped analyses with recorded scheduled closes. Verify the official auction before acting.
Auction snapshot
This page preserves the October 8, 2026 GSA open-auction observation for item 379180, sale 1-1-QSC-I-27-020, lot 018. Neither a numeric current bid nor bidder count was established.
A mixed biomedical lot must be valued by verified current/supportable components, not by seller mislabels, loose accessories, or summed new-equipment prices.
Review and correction history
Independent review not required. No corrections recorded.
View review and correction details
Independent review not required
No mandatory independent review was required under the current gate. This is not an approval.
How independent review worksHow evidence is classified
Seller facts, photo-derived observations, manufacturer context, unknowns, and LotCaliper assumptions remain explicitly separated.
Source Confirmed
Seller-confirmed
- Photos identify medTester 5000, LKG 601, SimCube SC-4, and UPM-DT-10; seller identifies two 9600 Plus units and one Dale 601.
Photo Derived
Photo-derived
- Multiple cases, leads, adapters and accessory hardware are visible, but per-instrument completeness and function are not.
Not Established
Not established
- Functional state, calibration, exact accessory assignment, medTester modules, Dale 601 photo identity, and complete per-instrument kits.
Manufacturer Context
Independent context
- 9600 Plus, SC-4, and LKG 601 retain current manufacturer support, while legacy equipment remains secondary upside unless verified.
Lotcaliper Assumption
LotCaliper assumptions
- $1,800 blind resale and $0 hammer; $3,000 and $700 only after representative verification.
Equipment identity
Calibration · quantity 1
Dynatech Nevada medTester 5000 biomedical test system
Identity confidence: High
Identity evidence
Photo directly identifies Dynatech Nevada medTester 5000, correcting the seller's leak-detector wording.
GSA Auctions · Image · observed Oct 8, 2026, 6:17 AM UTC
Calibration · quantity 1
Netech LKG 601 electrical safety analyzer
Identity confidence: High
Identity evidence
Photo directly identifies Netech LKG 601, correcting seller wording LK6601.
GSA Auctions · Image · observed Oct 8, 2026, 6:17 AM UTC
Calibration · quantity 1
PronK Technologies SimCube SC-4
Identity confidence: High
Identity evidence
Photo directly identifies PronK SimCube SC-4.
GSA Auctions · Image · observed Oct 8, 2026, 6:17 AM UTC
Calibration · quantity 2
Welch Allyn Two seller-identified 9600 Plus calibration testers
Identity confidence: Medium High
Identity evidence
Seller identifies two 9600 Plus units and photos show two matching Welch Allyn testers.
GSA Auctions · Source Field · observed Oct 8, 2026, 6:17 AM UTC
Configuration
Multiple cases, leads, adapters, power hardware, SimCube accessory hardware, and UPM-DT-10 manual
Confirmed · Medium High confidence
Configuration evidence
Photos show substantial external completeness and the UPM-DT-10 operating manual.
GSA Auctions · Image · observed Oct 8, 2026, 6:17 AM UTC
Per-instrument lead/probe completeness, power supplies, medTester options, calibration accessories, Dale 601 identity, and functional state
Not established · no source evidence establishes presence or absence
Configuration evidence
Photos do not establish complete per-instrument accessory inventories or function.
GSA Auctions · Image · observed Oct 8, 2026, 6:17 AM UTC
Condition
As-is / repair risk
Seller states repairable condition with possible missing parts and repairs. No principal instrument has a demonstrated functional or current calibration test.
Evidence confidence: High
Condition evidence
Seller condition wording and supplied photos.
GSA Auctions · Text · observed Oct 8, 2026, 6:17 AM UTC
Market evidence
Market evidence strength
Medium Low
Public auditability
Full
Evidence recency
Mixed
Modeled resale range
$1,800–$3,000
Conservative input used for max-bid math: $1,800
Market support: Medium Low
Limited market support — these are modeled assumptions, not a measured market value. Inspect the comparable evidence before relying on the range.
Component-level records establish supportable individual context but not an exact mixed-lot resale distribution; asks, sales, and new-equipment context remain separate.
| Model match | Evidence type | Treatment | Count |
|---|---|---|---|
| Exact Model | Realized | Used In Valuation | 1 |
| Exact Model | Realized | Context Only | 2 |
| Source | Evidence | Observed | Price | Relevance and treatment |
|---|---|---|---|---|
| eBay Welch Allyn 9600 Plus item 287198898480 Marketplace | Realized Exact Model | October 8, 2026 | $229 | Untested exact-model completed sale. Used In Valuation |
| eBay Dynatech medTester 5000 item 306454675994 Marketplace | Realized Exact Model | October 8, 2026 | $50 | Legacy exact-model completed sale. Context Only |
| eBay Dale 601 item 286942599039 Marketplace | Realized Exact Model | October 8, 2026 | $125 | Exact-model legacy completed sale. Context Only |
Sensitivity and robustness
Requires Verification
The scenarios show potentially workable economics, but the stated verification gate must be resolved before bidding responsibly.
Value-bearing instruments verify
- Max hammer
- $700
- Gross resale model
- $3,000
The ROI ceiling is about $711.54 before rounding.
SimCube SC-4 fails or is uneconomic
- Max hammer
- $0
- Gross resale model
- $2,000
The minimum-profit and ROI requirements leave no positive acquisition allowance.
Costs and maximum bid
| Transaction / operating cost | Amount | Basis |
|---|---|---|
| Selling Fees | $270 | LotCaliper assumption: 15% of modeled gross resale. |
| Shipping | $350 | LotCaliper pickup, packing, rigging, and inbound-logistics reserve; not a carrier or GSA quote. |
| Testing Repair Reserve | $750 | LotCaliper functional-test and diagnostic reserve. |
| Risk Buffer | $300 | LotCaliper reserve for repair-risk condition, unresolved configuration, functional verification, and specialist resale liquidity. |
| Other | $800 | LotCaliper missing-component, configuration, or recovery reserve; not a seller or service quote. |
- Buyer premium
- Not modeled
- Return requirements
- $500 minimum profit · 30% minimum ROI
- Computed bid constraints
Profit floor: $0
ROI floor: $0
Binding: Profit and ROI floors
- Snapshot blind/as-is max hammer
- $0
- Modeled result at recorded bid
- No bid recorded
This is a reseller ceiling, not a prediction of the auction's closing price. Any buyer premium or other unquoted acquisition charge must be deducted before bidding.
Identity corrections, calibration risk, and conditional economics
The photo-confirmed medTester 5000 is not the seller's generic leak detector, and the photo-confirmed LKG 601 supersedes LK6601 wording. Those corrections help research but do not establish working condition.
With no established observed bid, the page does not invent a $0 bid or zero bidders. Positive acquisition economics depend on the named value-bearing instruments passing representative checks.
- Test both 9600 Plus units, SC-4 modes, LKG 601 safety functions, and UPM-DT-10 measurement behavior.
- Inventory power supplies, adapters, leads, cases, manuals, medTester options, and Dale 601 separately before removal.
Recommendation and rationale
Snapshot decision
REVIEWREVIEW: bid and bidder count were not established, so no observed-bid comparison is valid. The $0 blind ceiling rises to about $700 only after value-bearing instruments pass representative verification.
Confidence
- Identity
- High
- Configuration
- Medium
- Condition
- Low
- Market Support
- Medium Low
- Costs
- Medium Low
Why these confidence levels were assigned
- Identity rationale
- Principal instruments are photo-confirmed and seller conflicts are corrected.
- Material unknowns: Bounded
- Configuration rationale
- Loose accessories lack complete per-instrument assignment.
- Material unknowns: Unbounded
- Condition rationale
- Repair-risk condition has no functional/calibration proof.
- Material unknowns: Unbounded
- Market Support rationale
- Evidence is fragmented by component and condition.
- Material unknowns: Unbounded
- Costs rationale
- Portable logistics are bounded but repair/calibration scope is not quoted.
- Material unknowns: Bounded
Market support assesses how well the available evidence supports the resale assumption. Exact third-party marketplace records may be omitted when source-use rights are unclear. Each dimension uses the published methodology rubric; a confidence label measures the strength and boundedness of its evidence, not the likelihood of a profitable outcome.
Risks and unknowns
High · Functionality Unverified
No principal instrument has demonstrated function or current calibration.
Seller repair-risk wording and exterior photos.
Sources
View cited public sources
- GSA Auctions item 379180
Official immutable auction-observation provenance.
- PronK SC-4 SimCube
Official current product and service context.
- Netech LKG 601
Official exact-model support context.
- Baxter/Welch Allyn 9600 Plus
Official current product context.