Analysis snapshotSnapshot decision:REVIEW

bioMérieux BACT/ALERT 3D Modular Microbial Detection System — GSA Auction Analysis

A photo-confirmed multi-module BACT/ALERT 3D installation has a removed workstation hard drive and unverified module configuration, software, microbial function, and Puerto Rico logistics, leaving a $0 blind hammer ceiling.

Stale-data warning

Analysis snapshot · Open at observation — observed October 2, 2026. This is an immutable observation, not a live feed. The auction is scheduled to close October 8, 2026. Price, status, close time, and terms may have changed. Check the source auction before bidding.

Decision at a glance

RecommendationREVIEW
Maximum hammer bid
$0

The auction bid ceiling supported by this analysis, if one is defensible; see costs below for buyer-premium treatment.

Why this decision

REVIEW: The $3,400 blind non-acquisition stack exceeds net resale before hammer; a $1,000 conditional ceiling requires configuration, software, representative function, and logistics to be bounded.

What to verify before bidding

  • Material configuration and functional verification remain unresolved.
Review all risks and unknowns

See costs and maximum bid for the displayed assumptions and buyer-premium treatment.

Snapshot auction result
Not captured
Bidders
Not captured
Blind-model resale
$3,500
Snapshot provenance and timing · observed Oct 2, 2026, 6:17 AM UTC · scheduled close October 8, 2026

GSA Auctions sale 1-1-QSC-I-27-012, lot 048 · Carolina, Puerto Rico 00979
Snapshot observed Oct 2, 2026, 6:17 AM UTC
Scheduled close October 8, 2026
Analysis prepared Oct 2, 2026, 6:17 AM UTC
Published October 2, 2026 · page updated October 2, 2026

Prepared and published by Oleksii Udod for LotCaliper.

These are individually prepared, time-stamped analyses with recorded scheduled closes. Verify the official auction before acting.

Auction snapshot

This page preserves the October 2, 2026 GSA pre-close observation for item 378784, sale 1-1-QSC-I-27-012, lot 048. No numeric current bid or bidder count was established.

A photo-confirmed multi-module BACT/ALERT 3D installation has a removed workstation hard drive and unverified module configuration, software, microbial function, and Puerto Rico logistics, leaving a $0 blind hammer ceiling.

Review and correction history

Independent review completed. No corrections recorded.

View review and correction details

Independent review completed

Status: Approved · Reviewed October 2, 2026

Mandatory adversarial review reduced the conservative post-verification resale to $3,500 and retained REVIEW, $0 blind hammer, and a $1,000 conditional ceiling only after full verification.

How independent review works
How evidence is classified

Seller facts, photo-derived observations, manufacturer context, unknowns, and LotCaliper assumptions remain explicitly separated.

Source Confirmed

Seller-confirmed

  • Multiple BACT/ALERT 3D cabinets/modules, workstation, monitor, keyboard, printer, cabling, and visible power indicators

Photo Derived

Photo-derived

  • Supplied photos support the stated physical identity/configuration observations only; they do not prove inclusion or function.

Not Established

Not established

  • Exact module references/capacity, controller architecture, software tier/recovery, incubation/detection function, communications, and freight

Lotcaliper Assumption

LotCaliper assumptions

  • $3500 conservative post-verification resale and $0 blind/as-is hammer before any unknown buyer premium.
Structured photo observations (1)

These are bounded observations from the preserved photographs. They do not establish functional operation or seller inclusion beyond the corresponding source evidence.

Model · Confirmed

BACT/ALERT 3D modular microbial-detection system

Photo confidence: High

Equipment identity

Laboratory · quantity 1

bioMérieux BACT/ALERT 3D modular microbial-detection system

Identity confidence: High

Identity evidence
  • Seller and photos establish BACT/ALERT 3D family identity and a substantial multi-module installation.

    GSA Auctions · Image · observed Oct 2, 2026, 6:17 AM UTC

Configuration

Multiple BACT/ALERT 3D cabinets/modules, workstation, monitor, keyboard, printer, cabling, and visible power indicators

Confirmed · Medium High confidence

Configuration evidence
  • Supplied photos support the stated physical identity/configuration observations only; they do not prove inclusion or function.

    GSA Auctions · Image · observed Oct 2, 2026, 6:17 AM UTC

Exact module references/capacity, controller architecture, software tier/recovery, incubation/detection function, communications, and freight

Not established · no source evidence establishes presence or absence

Configuration evidence
  • Exact module references/capacity, controller architecture, software tier/recovery, incubation/detection function, communications, and freight

    GSA Auctions · Image · observed Oct 2, 2026, 6:17 AM UTC

Condition

As-is / repair risk

Seller calls the system usable but says parts may be missing/repairs required and confirms the workstation hard drive was removed; LEDs are not full functional evidence.

Evidence confidence: Low

Condition evidence
  • Seller calls the system usable but says parts may be missing/repairs required and confirms the workstation hard drive was removed; LEDs are not full functional evidence.

    GSA Auctions · Text · observed Oct 2, 2026, 6:17 AM UTC

Market evidence

Market evidence strength

Medium

Public auditability

Full

Evidence recency

Current

Exact-family evidence ranges from $11.25 unknown/untested surplus to working-system asks; configuration-mixed upper asks do not support blind value for this Puerto Rico lot.

Model matchEvidence typeTreatmentCount
Exact ModelRealized Auction AcquisitionContext Only1
Related ModelAskingContext Only1
SourceEvidenceObservedPriceRelevance and treatment
AllSurplus lot 8907-7198

Auction

Realized Auction Acquisition

Exact Model

October 2, 2026$11.25

Unknown/untested BACT/ALERT 3D surplus result.

Context Only

eBay item 198272162269

Marketplace

Asking

Related Model

October 2, 2026$1,695

Working lower-capacity BACT/ALERT 3D 60 ask.

Context Only

Sensitivity and robustness

Requires Verification

The scenarios show potentially workable economics, but the stated verification gate must be resolved before bidding responsibly.

Blind/as-is downside

Max hammer
$0
Gross resale model
$2,500–$3,500

The $3,400 blind non-acquisition stack exceeds net resale before hammer; a $1,000 conditional ceiling requires configuration, software, representative function, and logistics to be bounded.

Costs and maximum bid

Transaction / operating costAmountBasis
Selling Fees$525LotCaliper reseller-model assumption: 15% of modeled gross resale.
Shipping$1,500Buyer-managed packing, loading, and inbound-logistics reserve; not a quote.
Testing Repair Reserve$1,500Functional-verification and repair reserve; not a service quote.
Other$700Configuration, accessory, or software-recovery reserve; it does not assert a component is missing.
Risk Buffer$400Uncertainty and return-risk reserve; not a quote.
Buyer premium
Not modeled
Return requirements
$500 minimum profit · 30% minimum ROI
Computed bid constraints

Profit floor: $0

ROI floor: $0

Binding: Profit and ROI floors

Snapshot blind/as-is max hammer
$0
Modeled result at recorded bid
No bid recorded

This is a reseller ceiling, not a prediction of the auction's closing price. Any buyer premium or other unquoted acquisition charge must be deducted before bidding.

Configuration, condition, and conservative bid ceiling

A photo-confirmed multi-module BACT/ALERT 3D installation has a removed workstation hard drive and unverified module configuration, software, microbial function, and Puerto Rico logistics, leaving a $0 blind hammer ceiling.

Verify identity, configuration, functional state, packing/removal cost, and any buyer premium before using a positive conditional ceiling.

  • Do not convert unknown bids or bidder counts to zero.
  • Do not credit unverified components, software, accessories, or function.

Recommendation and rationale

Snapshot decision

REVIEW

REVIEW: The $3,400 blind non-acquisition stack exceeds net resale before hammer; a $1,000 conditional ceiling requires configuration, software, representative function, and logistics to be bounded.

Confidence

Identity
High
Configuration
Medium Low
Condition
Low
Market Support
Medium
Costs
Medium Low
Why these confidence levels were assigned
Identity rationale
Seller and photos establish BACT/ALERT 3D family identity and a substantial multi-module installation.
Material unknowns: Bounded
Configuration rationale
Exact module references/capacity, controller architecture, software tier/recovery, incubation/detection function, communications, and freight
Material unknowns: Unbounded
Condition rationale
Seller calls the system usable but says parts may be missing/repairs required and confirms the workstation hard drive was removed; LEDs are not full functional evidence.
Material unknowns: Unbounded
Market Support rationale
Exact-family evidence ranges from $11.25 unknown/untested surplus to working-system asks; configuration-mixed upper asks do not support blind value for this Puerto Rico lot.
Material unknowns: Bounded
Costs rationale
Reserves are operator allowances, not quotes.
Material unknowns: Unbounded

Market support assesses how well the available evidence supports the resale assumption. Exact third-party marketplace records may be omitted when source-use rights are unclear. Each dimension uses the published methodology rubric; a confidence label measures the strength and boundedness of its evidence, not the likelihood of a profitable outcome.

Risks and unknowns

High · Functionality Unverified

Material configuration and functional verification remain unresolved.

Exact module references/capacity, controller architecture, software tier/recovery, incubation/detection function, communications, and freight

Sources

View cited public sources